Method of connecting fibers on an LWC board of OptiX BWS 320G

58

On an LWC board, RI is connected to D32, and TO is connected to M32. RO and TI are connected to client-side devices.

Other related questions:
Ports for connecting cables on the SCA boards of BWS 320G
Optical port RI on the front panel of SCA boards is an input interface for external optical signals in the OptiX BWS 320G system. The input interface receives signals in the primary channel and OSC sent by the remote OptiX BWS 320G system. TO is an output interface for external optical signals in the OptiX BWS 320G system. The output interface sends multiplexed signals in the primary channel and OSC at the local station to the downstream station.

Signal flow of SC2 boards for OptiX BWS 320G
The optical signals input to the RM1 and RM2 ports of the SC2 board are sent from the RM port of the SCA board. The optical signals output from the TM1 and TM2 ports of the SC2 board are sent to the TM port of the SCA board.

Whether an OHP2 board of a BWS1600G can be replaced by an OHP board of a BWS320G
An OHP2 board of a BWS 1600G cannot be replaced by an OHP board of a BWS 320G. BWS 320G also has 71OHP and 72OHP boards.

Whether the SC2 board on BWS 320G can be used on BWS 1600G
The SC2 board on BWS 320G cannot be used on BWS 1600G.

Whether the OHP2 board of BWS 1600G can be replaced by the OHP board of BWS 320G
The OHP2 board of BWS 1600G cannot be replaced by the OHP board of BWS 320G. BWS 320G also has 71OHP and 72OHP boards.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top