Command for querying the IP address of the NMS connected to BWS 1600G

16

:cm-get-lanconinfo;

Other related questions:
Whether the fan board on a BWS 1600G can be displayed on the NMS panel
The fan board on a BWS 1600G cannot be displayed on the NMS panel. However, the fan board on an OSN 6800 or 8800 can be displayed on the NMS panel. If a fan board is faulty, the FAN_FAIL alarm is reported. You need to replace the fan board.

Command used to configure the wavelength of BWS 1600G
Run the :cfg-set-wavelenexp command to configure the wavelength of BWS 1600G.

Command for configuring wavelengths on BWS 1600G devices
On BWS 1600G devices, run the cfg-set-wavelenexp command.

Whether an OHP2 board of a BWS1600G can be replaced by an OHP board of a BWS320G
An OHP2 board of a BWS 1600G cannot be replaced by an OHP board of a BWS 320G. BWS 320G also has 71OHP and 72OHP boards.

Whether the fan of BWS 1600G is displayed on the NE panel
The fan of BWS 1600G is not displayed on the NE panel

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top