Wavelength scanning results of MCA boards on BWS 1600G

The feature code T indicates that the wavelength is tunable. The SSE7LWFT01 board is a wavelength tunable board.

On BWS 1600G devices, run the cfg-set-wavelenexp command.

Question: What is the condition for the MCA board to report the CHAN_LOS alarm when wavelength monitoring configurations are correct? CHAN_LOS Answer: The MCA board determines a wavelength loss when it detects the following wavelength conditions: 1. The optical power is lower than -40 dBm. 2. The optical power is greater than 5 dBm. 3. A wavelength exceeds the standard wavelength by ±0.14 nm. 4. The signal-to-noise ratio is smaller than 7.5 dB. 5. If the difference between the maximum and minimum optical power is greater than 10 dB, the MCA board determines that the wavelength with the minimum optical power is lost.

Run the :cfg-set-wavelenexp command to configure the wavelength of BWS 1600G.

In the board name, T indicates tunable wavelengths. The SSE7LWFT01 board supports wavelength tunable optical modules.