Homepage FAQ Transport&Access Network

Method used to check whether fibers are correctly connected on an OSN 6800

TTI bytes can be modified to check whether fibers are correctly connected on OSN 6800 devices.

Other related questions:

Method for checking whether fibers are correctly connected on OptiX OSN 6800

TTI bytes can be modified to check whether fibers are correctly connected on OptiX OSN 6800.

Whether fiber connections between NEs of OSN 6800 devices can be synchronized to the NMS

On the NMS, you can choose Fiber/Cable/Microwave Link > WDM Fiber/Cable Synchronization to synchronize the fiber connections between NEs of OSN 6800 devices.

Methods for querying and deleting logical fiber connections on an OptiX OSN 6800 board by using commands

Command for querying: :cfg-get-fibermgr:SrcNeid,SrcBid,DstNeid,DstBid. Command for deleting: :cfg-del-fibermgr:SrcNeid,SrcBid,SrcPort,DstNeid,DstBid,DstPort.

Fiber connections of the OBU board on an OSN 6800

Fiber connections of the OBU board on an OSN 6800 are as follows: The TC port of the FIU board is connected to the VI port of the OBU board. The VO and IN ports of the OBU board are connected. The OUT port of the OBU board is connected to the IN port of the D40 board.

Whether there are special pigtail requirements of intra-site fiber connections on the OSN 6800

There are no special pigtail requirements except that the pigtails must be clean and free of any visual damage.

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

Method used to check whether fibers are correctly connected on an OSN 6800

Other related questions:

If you have more questions, you can seek help from following ways: