Homepage FAQ Transport&Access Network

Methods for querying and deleting logical fiber connections on an OptiX OSN 6800 board by using commands

125

Command for querying: :cfg-get-fibermgr:SrcNeid,SrcBid,DstNeid,DstBid.
Command for deleting: :cfg-del-fibermgr:SrcNeid,SrcBid,SrcPort,DstNeid,DstBid,DstPort.

Other related questions:

Method for checking whether fibers are correctly connected on OptiX OSN 6800

TTI bytes can be modified to check whether fibers are correctly connected on OptiX OSN 6800.

Command for deleting fiber connections of OTN devices

:cfg-del-fibermgr:SrcNeid,SrcBid,SrcPort,DstNeid,DstBid,DstPort

Methods for querying the attenuation value of the amplifier board on the OptiX OSN 6800 device

You can run the :cfg-get-attenuation:Bid,Port,Path command to query the attenuation value of the board.

Command for deleting logical boards on OSN 1800

:cfg-del-board,:cfg-verify

Fiber connections of the OBU board on an OSN 6800

Fiber connections of the OBU board on an OSN 6800 are as follows: The TC port of the FIU board is connected to the VI port of the OBU board. The VO and IN ports of the OBU board are connected. The OUT port of the OBU board is connected to the IN port of the D40 board.

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

Methods for querying and deleting logical fiber connections on an OptiX OSN 6800 board by using commands

Other related questions:

If you have more questions, you can seek help from following ways: