Methods for setting the working wavelength of an LWC board

50

The :ptp:Hexbid,b3,PP,YY;Hexbid represents the hexadecimal slot number. PP indicates the channel ID, which is 1 except the LWMR number, which ranges from 1 to 2. YY indicates the 320G wavelength number that ranges from 0x15 to 0x64.

Other related questions:
Methods used to determine the board wavelengths according to the barcode of the wavelength conversion board
The first five digits in the feature code of a fixed-wavelength OTU board indicate the wavelength. For example, 19300 indicates 193.00 THz.

Method used to set the wavelength to be monitored by the MCA board
In the NE Explorer, click the desired MCA board and choose Configuration > WDM Interface from the navigation tree. In the pane on the right, click By Board/Port(Channel), and select Monitor Wavelength from the drop-down list.

Methods for checking the wavelength on LWFS boards.
You can run the cfg-get-wavelength command to check the wavelength.

Methods for identifying board wavelengths according to barcodes of the wavelength conversion boards
For the feature code of a fixed-wavelength OTU board, the first 1 to 5 digits represents the wavelength. For example, 19300 indicates that the wavelength of a board is 193.00 THz.

Setting the wavelengths for ND2 boards
In the NE Explorer of the U2000, select the target ND2 board and choose Configuration > WDM Interface from the Function Tree to configure the wavelengths.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top