Command used to set the Automatic Laser Shutdown function for a laser on BWS 320G

17

To set the Automatic Laser Shutdown function for a laser on BWS 320G, run the following command:
cfg-set-lasautosd:bid,path,flag
To query the Automatic Laser Shutdown function for a laser on BWS 320G, run the following command:
cfg-get-lasautosd:bid,path

Other related questions:
Automatic laser shutdown on the SL64 board of the OSN 9500
When one end does not receive optical signals, it reports an R_LOS alarm to automatically shut down the laser, and the peer end shuts down its laser after receiving the R_LOS alarm. To ensure that light emitting can be immediately recovered after a fault is rectified, the lasers on the ports at both ends are turned on every other minute and the turn-on state of the lasers is kept for 2 seconds. If the fault persists, the lasers will be kept shutdown for 1 minute. The lasers at both ends are recovered if optical signals can be received immediately after the fault is rectified.

Function of automatically shutting down the client-side laser of a board
If this function is enabled, the client-side laser of a board will be automatically shut down when the WDM side of the board receives no optical signal.

Method used to set the status of the laser on the OBU board
In the NE Explorer, select the OBU board and choose Configuration > WDM Interface from the navigation tree. In the window that is displayed, set the laser status as required.

Method used to shut down a board laser
Select the desired board in the NE Explorer. Choose Configuration > WDM Interface from the navigation tree. Select By Board/Port(Channel) and choose Channel from the drop-down list. On the Basic Attributes tab, double-click Laser Status of the desired optical port, and then select Enable or Disable from the drop-down list to change the laser status.

Criteria for restarting a laser in IPA
When any detection condition meets the IPA recovery criteria, the laser is restarted.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat