Reason for not selecting TX1/RX1 to transmit FC400 services on the LOA board in ODUflex non-convergence mode


When an LOA board works in ODUflex non-convergence mode, the TX1/RX1 port corresponds to the 201ClientLP port, and no service needs to be configured between the two ports. Therefore, when FC400 services need to be transmitted through the TX1/RX1 port, select the 201ClientLP port on the NMS.

Other related questions:
If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top