Whether MPLS tunnels can be dynamically created for WDM equipment

4

Currently, MPLS tunnels cannot be dynamically created for WDM equipment.

Other related questions:
Whether 100G WDM equipment can use the OTDR to detect fiber cuts
If the user has not logged in to the device, check whether the line OTDR breakpoint detection function is enabled for the 100G systems of the OSN 9600 and OSN 8800. The OSN 8800 is used as an example here. The OSN 8800 supports the fiber doctor (FD) since V100R009. This function requires the TN12ST2 and TN13FIU boards, and U2000 license, and MDS 6630. The U2000 license supports the control item of this function.

Dustproof requirements for WDM equipment
The operating environment requirements of WDM equipment must comply with IEC 60529 (Degrees of protection provided by enclosures).

Whether there is a dedicated tester to test GE services of WDM equipment
Yes, the SMART Bits tester can be used for the test.

Whether the 100 G WDM equipment can use the OTDR to detect fiber cuts
The equipment supports the FD since V100R009. This function requires the TN12ST2 and TN13FIU boards, U2000 license, and MDS 6630.

Difference between conventional WDM equipment and OTN equipment
Both of them use the DWDM technology. The difference between them lies in that OTN equipment can achieve electrical cross-connection scheduling for various types of services.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top