Whether packet service boards intended for OptiX OSN 8800 can be used in a slave subrack

14

Packet service boards intended for OptiX OSN 8800 can be used only in an independent subrack, but not in the a subrack configured in the master-slave mode.

Other related questions:
Packet board configuration for slave OptiX OSN 8800 subracks
At present, packet boards can be used only in an independent subrack, but not in the master or slave subrack when subracks are configured in the master-slave mode. When packet boards are configured in an OptiX OSN 8800 T32 subrack, the cross-connect board must be TN52UXCH or TN52UXCM, and the system control board must be TN52SCC in the subrack. When packet boards are configured in an OptiX OSN 8800 T16 subrack, the cross-connect board must be TN16UXCM in the subrack.

Whether an OptiX OSN 8800 subrack can function as a slave subrack of an OptiX OSN 6800 subrack
Yes, it can function as a slave subrack of an OptiX OSN 6800 subrack.

Whether SDH boards can be used in an OSN 8800 slave subrack
SDH boards can be used only in an independent OSN 8800 subrack, but cannot be used in a subrack in master-slave mode.

Whether an ST2 board intended for an OSN 8800 subrack can be installed in an OSN 6800 subrack
An ST2 board intended for OSN 8800 can be used in an OSN 6800 subrack. To use the clock function of an ST2 board, the ST2 board must be inserted to the subrack equipped with clock boards.

Whether the ST2 boards intended for OSN 8800 devices can be installed in OSN 6800 subracks
The ST2 boards intended for OSN 8800 devices can be installed in OSN 6800 subracks. To use the clock function of the ST2 boards, the ST2 boards must be installed in subracks that are equipped with clock boards.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top