Port on the EFI board of OptiX OSN 8800 that is connected to the NMS

4

The NM_ETH1 and NM_ETH2 ports on the EFI board are used to connect the NMS.

Other related questions:
Whether OptiX OSN 3500 and OptiX OSN 8800 can be managed by the same NMS
Yes. They can be managed using the T2000 or U2000.

NMS monitoring port of OSN 8800
The NM-ETH port of an OSN 8800 device is the NMS monitoring port, which uses a crossover or straight-through network cable.

Whether there are fiber connections between the NQ2 board and the TOM board on OptiX OSN 8800
There is no fiber connection between the NQ2 board and the TOM board, which are interconnected through a cross-connect board.

Names of management network ports on an OSN 8800
The NM-ETH port of an OSN 8800 is the NMS monitoring port, which uses crossover network cables.

Whether the TDX board on OptiX OSN 8800 has tag attributes
The TDX board does not have tag attributes. Services are transparently transmitted.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top