How to check the up-time of a card on an AR router

6

Run the display version command. The following message is displayed before the version information about each card: LPU X : uptime is X week, X day, X hour, X minutes, which indicates the up-time of each card after the card has been registered. For example, if the following message is displayed after the display version command is run on a device: LPU 2 : uptime is 0 week, 0 day, 6 hours, 1 minute, the up-time of card 2 after the card has been registered is 6 hours and 1 minute.

Other related questions:
How to check the work mode of a card on an AR router
Run the display workmode command in any view to check the work mode of cards installed in all slots or specified slots.

How to check the software version of the fan card on an AR router
You can check the software version of the fan card on an AR router as follows: Run the display version slot fan command to check the software version of the fan card. In the output information displayed after the command is run, the value of the Software Version field is the software version of the fan card.

Method used to check the DHCP lease on the AR
On the AR, you can run the following command to check the IP address lease. -If IP addresses are assigned based on the interface address pool, run the display ip pool interface interface-pool-name [ start-ip-address [ end-ip-address ] ] command. -If IP addresses are assigned based on the global address pool, run the display ip pool [ name ip-pool-name [ start-ip-address [ end-ip-address ] ] ] command. The value of the Lease field is the lease of the address.

How do I view the broadband account of the AR router
Run the display current-configuration command to check the configuration file of the AR router. 1. When the AR router functions as the PPPoE server and "local-user user1@system service-type ppp" is queried, user1@system is the user name of the local account. 2. When the AR router functions as the PPPoE client and "ppp chap user user1@system" or "ppp pap local-user user1@system password" is queried, user1@system is the user name of the local account.

Method of querying card models on an AR router
Run the display device command or the display elabel command on an AR router to query component types of the router. The card names obtained using these two commands may be different, because the card names obtained by running the display device command are planned in advance but electronic labels are unique IDs of the cards and will not change with software upgrades.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top