Whether a port whose service type is set to STM-64 can receive 10GE WAN services

13

A port whose service type is set to STM-64 can receive 10GE WAN services. To receive 10GE WAN services, however, you are advised to set the port service type to 10GE WAN.

Other related questions:
Boards that can receive 10GE WAN services
The following boards can receive 10GE WAN services: LDX, LEM24, LEX4, LSX, LTX, TDX, THX, TOX, TQX, and TTX.

Client-side service type for OTN service boards when 10GE WAN services are received
When 10GE WAN services are received, the client-side service type for OTN service boards must be 10GE WAN or STM-64.

Whether timeslots are required for mapping STM-64 and 10GE LAN services to ODUk signals
The STM-64 and 10GE LAN services are mapped to ODUk signals in standard mapping mode which does not require timeslots.

Configuration modifications required for a type change from 10GE LAN to STM-64 for services from TDX to NQ2
You need to change the service type from 10GE LAN to STM-64 for the related client-side optical port of the TDX board, and change the line rate from speedup mode to standard mode for the NQ2 board.

Whether an OSN 1800 has boards that support STM-64 services
The LSX and LDX boards on an OSN 1800 support STM-64 services.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top