Whether the E2000 fiber adapters and E2000 fiber patch cords dedicated to the OSN 8800 HBA board can be replaced with common ones

1

The HBA board has high power, and therefore it must use E2000 fiber adapters and E2000 fiber patch cords. Common fiber adapters and fiber patch cords cannot be used for the HBA board.

Other related questions:
Meaning of the label on the fiber patch cord of an NS2 board on OSN 6800
The contents of the label on a fiber patch cord are as follows: Subrack IDs of the source and sink ports �?slot ID �?board name �?port

Whether there are fiber connections between an NQ2 board and a TOM board on an OSN 8800
There is no fiber connection between an NQ2 board and a TOM board. The two boards are interconnected through a cross-connect board.

Whether fibers are required to interconnect the TOM and NQ2 boards on the OSN 8800
On the OSN 8800, a TOM board is a tributary board while an NQ2 board is a line board. They are interconnected using cross-connections configured on the NMS instead of using fibers. A cross-connect board is used to achieve the cross-connections between the TOM and NQ2 boards so that services on the two boards can be interconnected.

Whether there are fiber connections between the NQ2 board and the TOM board on OptiX OSN 8800
There is no fiber connection between the NQ2 board and the TOM board, which are interconnected through a cross-connect board.

Types of fibers used to connect the HBA board
LSH/APC connectors and fibers are used on the OUT port of the HBA board, and LC connectors and fibers are used on the IN port of the HBA board.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top