FC services that are supported by the LOM board

11

The LOM board supports the following FC services:
FC100: SAN service at a rate of 1.06 Gbit/s
FC200: SAN service at a rate of 2.12 Gbit/s
FC400: SAN service at a rate of 4.25 Gbit/s

Other related questions:
FC services that are supported by the LOA board
The LOA board supports the following FC services: FC100: SAN service at a rate of 1.06 Gbit/s FC200: SAN service at a rate of 2.12 Gbit/s FC400: SAN service at a rate of 4.25 Gbit/s FC800: SAN service at a rate of 8.5 Gbit/s FC1200: SAN service at a rate of 10.51 Gbit/s

Reason why the timeslots occupied by GE services on the LOM board are different from those on other boards
The LOM board is specially designed to map client-side services to STM-64 signals and then encapsulate the services into OTU2 signals. STM-64 is divided into eight timeslots, and the bandwidth of each timeslot is 1.24 Gbit/s. Therefore, only one timeslot is required for the GE service. In contrast, the bandwidth of each timeslot on other boards is 155 Mbit/s, and 7 timeslots are required for the GE service.

Differences between timeslots occupied by GE services on LOM boards and those on other boards
Different from other boards, a LOM board maps a client service into an STM-64 signal and then multiplexes the STM-64 signal into an OTU2.An STM-64 signal is divided into 8 timeslots, each of which occupies 1.24 Gbit/s bandwidth. Therefore, a GE service on a LOM board occupies one timeslot. On other boards, each timeslot occupies 155 Mbit/s bandwidth. Therefore, a GE service on another board occupies seven timeslots.

Do CE series switches support the FC function
CE series switches support the FC function in V100R005C10 and later versions. Currently, only the CE6850U-HI supports the FC function.

Boards supporting FC800 services
The TQX, TDX, and LOA boards support FC800 services.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top