FC services that are supported by the LOA board

11

The LOA board supports the following FC services:
FC100: SAN service at a rate of 1.06 Gbit/s
FC200: SAN service at a rate of 2.12 Gbit/s
FC400: SAN service at a rate of 4.25 Gbit/s
FC800: SAN service at a rate of 8.5 Gbit/s
FC1200: SAN service at a rate of 10.51 Gbit/s

Other related questions:
FC services that are supported by the LOM board
The LOM board supports the following FC services: FC100: SAN service at a rate of 1.06 Gbit/s FC200: SAN service at a rate of 2.12 Gbit/s FC400: SAN service at a rate of 4.25 Gbit/s

Whether LOA boards support STM-16 services, and mapping path if STM-16 services are supported
In ODU1 non-convergence mode, LOA boards can receive STM-16 services. They map STM-16 services into ODU1 services.

LOA board configuration
The LOA board can be applied in five scenarios depending on the port working mode. You need to manually configure each application scenario on the NMS on a per-NE basis.

Method used to configure services on an LOA board
There are three methods of configuring services on the LOA board: 1. By site manually 2. Using service packages for the LOA board 3. By trail

Whether the LOA board supports FC100/FC200 multi-mode services
As described in the board specifications, LOA supports FC100/FC200 multi-mode services and can use I-16-2km modules.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top