Method used to set the gateway IP address for the OSN 8800

10

In the NE Explorer, click the desired NE and choose Communication > Communication Parameters from the navigation tree. Then set communication parameters such as the IP address.

Other related questions:
Method used to set the IP address of the web LCT computer when logging in to the OSN 8800 on the web LCT
Set the computer IP address to be in the same network segment as the equipment IP address. The default network segment is 129.9.X.X.

Method used to configure two IP addresses for an interface on the USG firewall and set the primary IP address as the dynamic IP address allocated by the DHCP gateway
You can configure two IP addresses for an interface on the USG2000, USG5000, and USG6000 and set the primary IP address as the dynamic IP address allocated by the DHCP gateway as follows: Note: The SUB address can only be configured as a static IP address of the PC. [USG]interface GigabitEthernet0/0/1 [USG-GigabitEthernet0/0/1]ip address 192.168.2.1 255.255.255.0 [USG-GigabitEthernet0/0/1]ip address 192.168.1.1 255.255.255.0 sub [USG-GigabitEthernet0/0/1]quit [USG] dhcp server ip-pool 0 [USG-dhcp-0]network 192.168.2.0 mask 255.255.255.0 [USG-dhcp-0]dns-list 192.168.2.3 [USG-dhcp-0] quit IP addresses in network segment 192.168.2.0 can be dynamically allocated. IP addresses in network segment 192.168.1.0 are static IP addresses set on the PC.

Method used to configure licenses of OptiX OSN 8800
OptiX OSN 8800 licenses, such as universal line board license, TP-Assist license, and the license for OptiX OSN 8800 T32 universal subrack, need to be configured on the U2000. The procedure is as follows: 1. In the main topology, choose Configuration > NE Batch Configuration > NE License Authorization. The Choose License window is displayed. 2. In the Choose License window, select the license to be loaded and click OK. The NE License Authorization window is displayed. 3. On the left side of the NE License Authorization window, select the desired NE from the navigation tree. 4. On the right side of the window, set the license.

How to change the IP address of the U1900 series unified gateway
Two methods are available: 1. Use the default IP address to log in to the web management system of the U1900. Choose System > Device Management and change the IP address. 2. Log in to the device through a serial port or using Telnet and run the config system ip mode static ipmode ipv4 address 192.168.1.2/24 gatewayip 192.168.1.1 command.

Method used to obtain RMON descriptions of the OSN 6800/8800
RMON is mainly used for fault locating, and is originally described in Feature Description of product documentation. Since the OSN 6800/8800 V100R007C00_03, RMON descriptions are available in Troubleshooting of product documentation.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top