Whether the optical module of the OSN 8800 ST2 board is pluggable

27

The ST2 board supports the 1511 nm or 1491 nm pluggable optical module.

Other related questions:
Whether the optical module on a TOA board is pluggable
The optical modules on TOA boards are pluggable and support multiple rates.

Whether the SS49SCBC01 board supports pluggable optical modules
The STM-4 optical port type of the SS49SCBC01 board is SC and therefore the board does not support pluggable optical modules.

Whether all WDM boards support pluggable optical modules
No, not all WDM boards support pluggable optical modules. Only some boards in specified hardware versions support pluggable optical modules.

Pluggable optical modules
Pluggable optical modules (eSFP, SFP+, XFP, and CFP) apply to optical communication systems. They achieve conversion between optical signals and electrical signals, and support hot swap.

Whether an ST2 board intended for an OSN 8800 subrack can be installed in an OSN 6800 subrack
An ST2 board intended for OSN 8800 can be used in an OSN 6800 subrack. To use the clock function of an ST2 board, the ST2 board must be inserted to the subrack equipped with clock boards.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top