Whether SFIU can work with SC2

15

No, SFIU cannot work with SC2. The OSC board that can work with the SFIU board must be ST2.

Other related questions:
Whether an NE equipped with SFIU+ST2 be interconnected with an NE equipped with FIU+SC2
No, they cannot. An NE equipped with SFIU+ST2 can be interconnected only with an NE that has the same configuration.

Working rate of an SC2 board
The working rate of an SC2 board can be negotiated between 4.096 Mbit/s and 16.896 Mbit/s.

OSC boards that can work together with the SFIU board
The OSC board that works with the SFIU board must be ST2, because the ST2 board supports either the 1511 nm or 1494 nm pluggable optical module. When the ST2 board works with the SFIU board, the operating wavelength of its RM1/TM1 port is 1511 nm and that of its RM2/TM2 port is 1491 nm. The SFIU board converges these two monitoring signals so that they can be transmitted over one optical fiber, implementing the commissioning-free and compensation-free functions defined in IEEE 1588v2.

Cooperation between ST2 and SFIU
An SFIU board multiplexes the main path signals and OSC signals into a single communications channel, and demultiplexes these signals. The OSC board that can work with the SFIU board can only be ST2. The SFIU board sends OSC signals to the ST2 board through the OSC1 optical port and receives OSC signals from the ST2 board through the OSC2 optical port.

Whether the HBA board can be used together with the SFIU board
No. The HBA board must be used together with the TN13FIU02 board.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top