Functions of the DCP board

6

The DCP board is a two-channel OLP protection board. One DCP board provides the function of dual feeding and selective receiving for two channels of signals. The DCP board can implement intra-board 1+1 protection, client 1+1 protection, and OWSP protection.

Other related questions:
Functions of the DCP board
The DCP board is a two-channel OLP protection board. One DCP board provides the function of dual feeding and selective receiving for two channels of signals. The DCP board can implement intra-board 1+1 protection, client 1+1 protection, and OWSP protection.

Protection implemented by TOM and DCP boards
Intra-board 1+1 protection can be implemented when the TOM board works with the DCP board.

Port use of DCP boards on OTN devices
One DCP board is equivalent to two OLP boards, and two protection groups can be configured for the DCP board.

Principles for inter-board OLP or DCP protection
The OLP and DCP boards have the same functions and implementation modes. A DCP board has two optical ports, which can emit four light signals. Therefore, one DCP board functions as two OLP boards. The following uses OLP as an example. 1. OLP applies to line protection. [Application scope]: An OLP board is a 1+1 optical line protection board and implements 1+1 protection for optical line signals. [Working principle]: In a DWDM system, the transmit-end FIU board transmits light to the OLP board so that it is split at a ratio of 1:1. The two channels of split light are transmitted to the working fiber (channel) and protection fiber (channel) respectively. At the receive end, the OLP board detects and compares the optical power of the light on the working and protection channels. Based on the protection switching conditions, the OLP board determines whether to enable the optical switch to protect fiber routes and the services carried on the fiber routes. 2. OLP applies to client protection. [Application scope]: OLP is used for client protection. [Working principle]: (1) An OTU board detects an abnormality and reports a message to the system control board. (2) The message is sent from the OTU board to the system control board. (3) The system control board responds to the interrupt request (Fast_Int) of the OTU board and issues a command to request to shut down the client-side laser of the OTU board. (4) The command is sent from the system control board to the OTU board. (5) The OTU board receives the command and shuts down the client-side laser. (6) The OLP board detects and compares the optical power of the light on the working and protection channels. After detecting an optical power change, the OLP board switches the route.

Switching time of protection configured using DCP boards
The DCP board can be used to configure inter-subrack 1+1 optical channel protection and extended intra-board wavelength protection. The protection switching time is less than 50 ms and meets the ITU-T standards.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top