Whether the TOM board supports 10G services

14

The TOM board can receive services at the maximum rate of OTU1. It cannot receive services at the 10G rate.

Other related questions:
Whether a 10G optical module can be used on the TOM board to transmit 2.5G services
The TOM board supports optical modules at a maximum rate of 2.5G. It does not support 10G optical modules.

Whether a TOM board supports 622 Mbit/s services
Yes, a TOM board supports 622 Mbit/s services. When functioning as a tributary board, a TOM board performs mutual conversion between ODU0/ODU1 signals and signals at rates in the range of 100 Mbit/s to 2.67 Gbit/s on the client side. When functioning as an OTU board, a TOM board performs mutual conversion between OTU1 signals and signals at rates in the range of 100 Mbit/s to 2.67 Gbit/s on the client side.

Whether TOM boards can transmit 2.5G services
TOM boards can transmit 2.5G services but one TOM board can transmit a maximum of four channels of 2.5G services.

Whether services on the TOM board and TOA board can be interconnected
Yes, they can be interconnected on the OSN 8800 when the two boards have the same service type and mapping mode settings.

Support for 10G POS services of the TN52TQX board in OptiX OSN 6800
Yes, it does. The TQX board supports 10GE LAN, 10GE WAN, and STM-64 (corresponding to 10G POS) services.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top