Method used to connect NMS computers

7

You can connect them directly or over a LAN.

Other related questions:
Method used to query intra-NE fiber connections on the NMS
You can query the logical fiber connections between optical NEs in the main view of the U2000. On the main topology of the U2000, double-click the desired optical NE to display the status diagrams of the NE. Select the signal flow diagram. Then you can query the logical fiber connections between boards of the optical NE.

Method used to query intra-site fiber connections on the NMS
On the main topology, you can double-click the target NE and click the Signal Flow Diagram tab to view the intra-site fiber connections.

Method used to cancel alarm masking on the NMS
On the U2000, choose Fault > Settings > Mask Rule from the main menu. On the Mask Rule tab, select the desired masking policy, and deselect the Enable check box or delete the policy.

Clearing statistics of the NMS accessing MIB nodes
The procedure for clearing statistics of the NMS accessing MIB nodes is as follows: In the user view, run reset snmp-agent statistics mib [ address ipv4-address | ipv6 ipv6-address | vpn-instance vpn-instance-name address ipv4-address ] to clear statistics of the NMS accessing MIB nodes of the device.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top