Method used to convert an SNCP service into a common WDM service

0

For details, see the related product documentation. Note that this conversion operation may interrupt services.

Other related questions:
ODUk SNCP service configuration procedure
ODUk SNCP service creation by trail: (1) Configure TCM overheads of the line board. (2) Set board parameters. (3) Create a client trail. (4) Create ODUk SNCP protection. (5) Check ODUk SNCP protection status. ODUk SNCP service creation by single site: 1. Configure ODUk SNCP protection at the transmit site. (1) Configure OTN overheads of the line board. (2) Set board parameters. (3) Create ODUk SNCP protection. 2. (Optional) Configure an electrical regeneration site. (1) Set board parameters. (2) Create bidirectional electrical cross-connection services. 3. Configure ODUk SNCP protection of the receive site. 4. Check ODUk SNCP protection status.

Query of the SNCP service configuration and protection switching on WDM devices
Choose <b>Function Tree</b> > <b>Configuration</b> > <b>WDM service management</b> > <b>SNCP service control</b> to query the WDM service configuration and protection switching status.

Method used to check the condition of NG WDM service channels
A meter can be used to check the condition of NG WDM service channels. A PRBS test can also be used to check the condition at deployment.

Procedure for configuring ODUk SNCP services
The procedure for configuring ODUk SNCP services is as follows: 1. Determine the type of the ODUk SNCP to be configured. 2. Configure the OTN overheads for line boards. 3. Create an SNCP service.

Whether there is any method used to monitor the quality of services carried over wavelengths in a WDM system
An OSA can be used to monitor the physical performance of single wavelengths in a WDM system. The performance of service signals carried over wavelengths, however, cannot be monitored.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top