Method used to query the service cross-connection configurations of the TOM board


1. Select the NE in the NE Explorer, and choose Configuration > WDM Service Management from the navigation tree.
2. On the WDM Cross-Connection Configuration tab, click Query to view the cross-connection configuration of the corresponding board.

Other related questions:
Cross-connection level of the services on the TOM board
ODUk cross-connections are configured on the TOM board. For details about the service grooming mode in each scenario, see the multimedia in "Logical Ports" in the product documentation.

ODU1 cross-connections failing to be created on the TN52TOM board of OSN 6800 where no cross-connection is configured
The TN52TOM board does not support distributed ODU1 cross-connections.

Whether two GE services on two TOM boards can be cross-connected to the same ODU1 timeslot on an ND2 board
The cross-connections between the TOM and ND2 boards are ODU1 cross-connections, which occupy the entire ODU1 timeslot. Therefore, two GE services on two TOM boards cannot be cross-connected to the same ODU1 timeslot of an ND2 board.

Method used to handle the error message displayed indicating a mismatch between the cross-connect board and service board during logical board addition for the TOM board (error code 44061)
If the TOM board is a TN11TOM board, it cannot be used on the OSN 8800. You are advised to replace it with a TN52TOM board.

Method used to determine whether the TOM board port that receives GE services is normal
You can query the RMON performance data of the port that receives GE services. If the sent and received data packets are normal, the port is normal.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top