Support for maximum packet length modification

1

The parameter indicating maximum packet length is available only on OTU and tributary boards that support Ethernet services (such as GE and 10GE services). The parameter can be modified.

Other related questions:
Maximum packet length supported by the TDX board
The maximum packet length supported by the TDX board ranges from 1518 to 9600 (9600 by default). For the TN52TDX board, the maximum packet length cannot be set or queried on the U2000 when Port Mapping is set to Bit Transparent Mapping (11.1G).

Maximum length of a site name supported by endpoints
The site name can contain at most 64 characters. If the name is too long, it will be shown in multiple lines automatically. Numbers and English and Chinese letters are supported. How many letters or numbers can be displayed in each line depend on the letter and number width. The number of lines is not limited.

What is the maximum length of the network cable supported by the U1900?
In theory, the maximum length of the network cable is 100 m. However, this length is not recommended.

Maximum command length of the USG6000
The maximum command length of the USG6000 profile is 510 characters. The system cannot identify any command that contains more than 510 characters.

What is the length restriction for the control cable between a camera and an endpoint?
Length restriction for the control cable between a camera and an endpoint: To prevent high control signal attenuation from affecting proper control signal transmission, you are advised to use a control cable that does not exceed 50 meters.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top