Transmission distance of the client side of the TN53TSXL board

10

The client side of the TN53TSXL board is equipped with a fixed optical module, whose transmission distance is 2 km.

Other related questions:
Client-side transmission distance of a 100G OTU board
The client-side transmission distance of a board depends on the client-side optical module.

Whether client-side GE services support a transmission distance of 120 km
No. The client-side optical modules for GE services support a maximum transmission distance of 80 km. No optical module is available to support a transmission distance of 120 km.

Whether the two client-side optical ports of the TN12TDX board can be set to MAC transparent transmission
For the TN12TDX board, only its RX1/TX1 port can be set to MAC transparent transmission when the port mapping mode is set to MAC Transparent Mapping (10.7G). At this time point, the service type of the RX2/TX2 optical port must be set to None.

Number of client-side ports on the TTX board
There are 10 physical ports on the client side of the TTX board and the port with the maximum number is RX10/TX10. On the NMS, numbers 1 and 2 have been assigned to IN/OUT ports on line boards. Ports on tributary boards are numbered from 3. TTX is a tributary board and therefore its ports are numbered from 3. In other words, logical port 3 on the NMS corresponds to the RX1/TX1 port.

Maximum transmission distance of WDM equipment without an electrical regeneration board
The transmission distance varies depending on the wavelength spacing, rate, fiber type, and modulation format of the system.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top