Whether NS3 board resources can be shared between STM-64 and 10GE LAN services on the TQX and NS3 boards

0

Yes. The STM-64 and 10GE LAN services provisioned on the TQX and NS3 boards of OTN equipment can share the same resources of the NS3 board. The ODU3 services need to be in speedup mode and ODU2 service mode need to be set according to the actual service type.

Other related questions:
Whether wavelengths on the NS3 board are tunable
The NS3 board supports tunable wavelengths on the WDM side.

Difference between client-side 10GE LAN and 10GE WAN services on the TQX board
Both 10GE LAN and 10GE WAN services are Ethernet services but have different service rates. The rate of 10GE LAN services is 10.31 Gbit/s and that of 10GE WAN services is 9.95 Gbit/s. Set the client-side service type of the TQX board based on the actual rate of received services.

Requirement for cross-connect boards when the TQX board is used to transmit STM-64 services
No.

Whether timeslots are required for mapping STM-64 and 10GE LAN services to ODUk signals
The STM-64 and 10GE LAN services are mapped to ODUk signals in standard mapping mode which does not require timeslots.

Whether the E9LBFS board supports 10GE LAN services
The E9LBFS board supports 10GE LAN, 10GE WAN, STM-64, and OC-192 services.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top