Direct connection of the TQX board to a device that provides a GE port

24

The TQX board uses a 10GE optical module and supports only 10GE services. It does not support autonegotiation of GE services. Therefore, the TQX board cannot be directly connected to a device that provides a GE port.

Other related questions:
OSN 6800 boards that provide four STM-16 or GE ports
The TMX board provides four STM-16 ports but no GE port. The LQM board provides four GE ports, but the total bandwidth cannot exceed 2.5G.

Whether the CX110 provides GE or 10GE ports
Yes, the CX110 provides GE and 10GE ports for switching data with external networks. Four 10GE optical ports 12 GE electrical ports

Whether the CX111 provides GE or 10GE ports
Yes, the CX111 provides GE and 10GE ports for switching data with external networks.
? Four 10GE optical ports
? 12 GE electrical ports

Whether a TQX board mapping FC800 into ODU2 can be interconnected with another TQX board mapping FC800 into ODUflex
No, they cannot. This is because they have different mapping paths.

Requirement for cross-connect boards when the TQX board is used to transmit STM-64 services
No.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top