Reason why the WDM-side signals of the TN11LOG board can be regenerated by the TN11LSXR board

9

WDM-side signals of the TN11LOG board can be regenerated by the TN11LSXR board because the FEC type of the TN11LSXR board is the same as that of the TN11LOG board.

Other related questions:
Reason why the WDM-side signals of the TN12LOG board can be regenerated by the TN12ND2/TN52ND2/TN53ND2/TN53NQ2/TN54NQ2 board
WDM-side signals of the TN12LOG board can be regenerated by the TN12ND2/TN52ND2/TN53ND2/TN53NQ2/TN54NQ2 board because they have the same FEC type.

Whether the TWC board can function as the regeneration board of the LDG board
The TWC board can function as the regeneration board of the LDG board.

Causes for reporting the LASER_MODULE_MISMATCH alarm when the WDM side of the LEX4 board is interconnected with the client side of the LBFS board
By default, a colored optical module is configured on the WDM side of the LEX4 board, and the board software will automatically create a logical colored optical module for this WDM-side optical module. During practical application, you need to create the correct logical optical module based on the actual type of physical optical module that is used.

Reason why two unidirectional regeneration boards must be configured in paired slots
To implement ESC communication, the transmit-end and receive-end boards for the same wavelength must be configured in paired slots because overhead bytes are transmitted through the backplane buses between paired slots.

Access rate of a WDM-side port on the TMX board
The WDM-side signals of the TMX board are OTU2 signals, and the access rate is 10.71 Gbit/s.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top