OSN 8800 NE resource grouping to OTN optical NEs

7

Select an optical NE. Right-click it and choose Attribute from the shortcut menu. Navigate to the Resource Division window. In the window, find the desired OptiX OSN 8800 NE from idle NEs and add the NE to the right-side box. Then click OK.

Other related questions:
Impact of changing the NE ID of OSN 8800
The following functions will be affected if the NE ID is changed for WDM devices: the logical fiber connections (FM), automatic optical power adjustment (OPA), intelligent power adjustment (IPA), automatic level control (ALC), automatic power equilibrium (APE), wavelength locking, optical port protection, OWSP protection, OD, and OD V2.

Precautions for changing the IDs of OSN 3800/6800/8800 NEs
Pay attention to the following when changing the IDs of OSN 3800/6800/8800 NEs: Changing an NE ID is risky because it will interrupt NE communication. Before changing an NE ID, you must delete fiber connections, protection groups, and functions such as IPA and ALC from the NE. After changing the NE ID, you need to reconfigure the fiber connections and functions for the NE on the U2000. Before changing an NE ID, you must delete the manually added monitoring relationship between WMU boards and OTU boards or line boards from the NE. After changing the NE ID, you need to restore the monitoring relationship on the U2000. If the IP address of an NE is not changed before you change the NE ID, the IP address of the NE varies according to the NE ID. Once the IP address of the NE is changed, the association between the NE ID and IP address is canceled automatically.

Restriction on the types and quantity of OSN 8800 NEs on an ASON network
For an OCS ASON (also SDH ASON) or OTN ASON network that is equipped with OSN 8800 of version V100R007C02 or later, the number of electrical subracks cannot exceed 150 equivalent OSN 8800 T32 subracks (75 OSN 8800 T64 subracks, or 300 OSN 8800 T16 subracks).

Number of equivalent NEs that one OSN 8800 platform subrack is equal to
One OSN 8800 platform subrack is equal to one equivalent subrack.

Whether the NM_ETH port or the ETH port is used for communication between optical NEs and electrical NEs when optical NEs and electrical NEs are separated from each other
The NM_ETH port (the one connecting to the NMS) is used for communication between optical NEs and electrical NEs.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top