How can I view the working mode of a board that supports switchover of the working mode

9

Run the display workmode command in any view to view the board working mode of a specified slot or all slots.

Other related questions:
How to check the work mode of a card on an AR router
Run the display workmode command in any view to check the work mode of cards installed in all slots or specified slots.

How to view the work mode of the U1900?
To view the work mode of the U1900, run the show system stationtype command. Four work modes are available: normal, localgw, primary, and standby. The corresponding site types are normal node, local gateway, active node in the two-node cluster, and standby node in the two-node cluster respectively.

How can I know an AP's working mode
An AP can work in Fit or Fat mode. After logging in to an AP, run the display version command to view the AP model and working mode. For an AP that supports only one mode, you can identify its working mode through its model. - APs that support only the Fat mode: AP9130DN -- APs that support only the Fit mode: AP2010DN, AP2030DN, AP6310SN, AP7110SN, AP7030DE, AP9330DN, R230D, R240D, and AP4030DN-E

Port working modes supported by an EFT8 board on an OSN 3500
Port working modes supported by an EFT8 board on an OSN 3500: 100M full-duplex, 10M full-duplex, and auto-negotiation

Can 802.11n devices work only in 802.11n mode? Can 802.11n devices work in 802.11bg mode
802.11n devices can work in multiple modes including 802.11bg mode.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top