Whether NE alarm tones and indicators can be set on OSN 8800

4

You can press the ALMCUT button on a system control board to clear the alarm tones. The alarm indicators cannot be cleared.

Other related questions:
Whether NE alarm tones and indicators can be set on OSN 8800
You can press the ALMCUT button on a system control board to clear the alarm tones. The alarm indicators cannot be cleared.

OSN 8800 NE resource grouping to OTN optical NEs
Select an optical NE. Right-click it and choose Attribute from the shortcut menu. Navigate to the Resource Division window. In the window, find the desired OptiX OSN 8800 NE from idle NEs and add the NE to the right-side box. Then click OK.

Impact of changing the NE ID of OSN 8800
The following functions will be affected if the NE ID is changed for WDM devices: the logical fiber connections (FM), automatic optical power adjustment (OPA), intelligent power adjustment (IPA), automatic level control (ALC), automatic power equilibrium (APE), wavelength locking, optical port protection, OWSP protection, OD, and OD V2.

Whether the TDX board on the OSN 8800 can be interconnected with the SL64 board on an NG SDH NE
Yes, the two boards can be interconnected through STM-64 optical ports.

Whether the speed of fans on an OSN 8800 can be adjusted
An OSN 8800 fan tray assembly can work in either of the following modes:
Auto Speed Mode: The fan tray assemblies automatically regulate fan speeds, depending on the subrack temperature.
Adjustable Speed Mode: You can manually adjust the fan speed.
The speed of the fans on an OSN 8800 is adjusted intelligently. The speed levels include high, medium, and low. The fan speed can be adjusted on the CLI. However, it is not recommended that the configurations be modified. The fan speed is intelligently adjusted by the software.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top