Whether the TN11AUX02 board can replace the TN11AUX01 board on OSN 6800 devices

9

Yes.

Other related questions:
Difference between the TN11AUX01 and TN11AUX02 boards
The TN11AUX01 board provides three or eight jumpers to set subrack IDs ranging from 0 to 7. The TN11AUX02 board provides eight jumpers to set subrack IDs ranging from 0 to 31.

Method used to set the jumpers on the TN11AUX02 board of the OSN 6800
The J16, J15, J4, J3, and J2 jumpers can be set in 32 combinations, representing decimal values 0-31. The default setting of the five jumpers is 00000. The value 0 indicates the master subrack and the other values indicate slave subracks.

Whether the TN11FAN board of the OSN 6800 can be replaced with a fan of another model
No, other fans cannot be used to replace the TN11FAN board. The hardware models must be consistent during hardware replacement.

Whether an ST2 board and SC2 board can be interconnected on an OSN 6800
It is not recommended that ST2 and SC2 boards be interconnected because they have different rates and encoding formats (CIM used by the SC2 board and FEC used by the ST2 board). SC1 and SC2 boards use the same rate and encoding format, and therefore can be interconnected.

Whether the TN13OBU103 board can substitute for the TN11OBU103 board on OptiX OSN 6800
The TN13OBU103 board can substitute for the TN11OBU103 board on OptiX OSN 6800. After the substitution, the TN13OBU103 board provides only the functions of the TN11OBU103 board, but the VOA is unavailable. Depending on the NE version and gain, the TN12OBU or TN13OBU board can substitute for the TN11OBU103 board so that the integration attenuation can be configured for the OBU.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top