Optical fiber connections of the TN12OAU board

3

One multiplexed optical signal received at the IN port is sent to the EDFA optical module. The EDFA optical module amplifies the optical power of the signal and locks the gain of the signal. The signal is then transmitted to the DCM board through the TDC port for dispersion compensation. Then, the signal is sent back through the RDC port. The amplified multiplexed signals are output through the OUT port.
The multiplexed signal can also be input through the VI port and output through the VO port after the optical power is adjusted. Then, the IN port receives the multiplexed signal sent from the VO port.

Other related questions:
Fiber connections of TN12OAU boards
One multiplexed optical signal received at the IN port is sent to the EDFA optical module. The EDFA optical module amplifies the optical power of the signal and locks the gain of the signal. The signal is then transmitted to the DCM board through the TDC port for dispersion compensation. Then, the signal is sent back through the RDC port. The amplified multiplexed signals are output through the OUT port. The multiplexed signal can also be input through the VI port and output through the VO port after the optical power is adjusted. Then, the IN port receives the multiplexed signal sent from the VO port.

Fiber connections on the optical ports of the WMU board
The IN1 and IN2 optical ports on the WMU board separately connect to the MON port on two OA or FIU/ITL boards configured in two different transmit directions for centralized wavelength monitoring.

Fiber connections for the SFIU boards
The fiber connections for SFIU boards vary depending on their positions on the NEs and networks.

Fibers connected using SFIU boards
Each port on the SFIU board supports bidirectional transmission. It can receive or transmit a signal depending on the position of the SFIU board. The optical ports LINE1, LINE2, SYS1, and SYS2 can be used to transmit or receive signals on the main optical path.

Can optical interfaces on CE series switches be connected using a single optical fiber
Optical interfaces on CE series switches in V100R002C00 and later versions can be connected using a single optical fiber.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top