Specifications of optical ports on the SC2 board of OSN 6800 devices

16

The operating wavelength of the SC2 board is 1510 nm and sensitivity is �?6 dB.

Other related questions:
Specifications of SC2 board optical ports on OSN 6800 devices
The working wavelength of SC2 boards is 1510 nm and sensitivity is �?6 dB.

Two optical port rates of SC1 and SC2 boards on OSN 6800
Question: How to understand the optical port rates 16.896 Mbit/s and 4.096 Mbit/s of SC1 and SC2 boards described in OSN 6800 product documentation? Root cause: None Answer: 1. Optical ports on SC1 and SC2 boards on OSN 6800 support two rate modes. In the networking containing OSN 6800, the rate 16.896 Mbit/s is used in the case of interconnection with the SC2 or SC1 board, and the rate 4.096 Mbit/s is used in case of the interconnection with an optical supervisory control (OSC) board on BWS 1600G. 2. The rate mode does not need to be set and is determined by the board. It is auto-adaptive.

Rate comparison of optical ports on SC1 and SC2 boards on OSN 6800
1. Optical ports on SC1 and SC2 boards of OSN 6800 support two rate modes. In the networking containing OSN 6800, the rate 16.896 Mbit/s is used for the interconnection with the SC2 or SC1 board, and the rate 4.096 Mbit/s is used for the interconnection with an OSC board on BWS 1600G. 2. No rate mode needs to be set on the NMS. This is because the rate is auto-sensing and determined by boards.

Whether an ST2 board and SC2 board can be interconnected on an OSN 6800
It is not recommended that ST2 and SC2 boards be interconnected because they have different rates and encoding formats (CIM used by the SC2 board and FEC used by the ST2 board). SC1 and SC2 boards use the same rate and encoding format, and therefore can be interconnected.

Whether the ST2 board and the SC2 board can be interconnected on OptiX OSN 6800
It is not recommended that the ST2 and SC2 boards be interconnected because they have different rates and encoding formats (CIM used by the SC2 board and FEC used by the ST2 board). The SC1 and SC2 boards use the same rate and encoding format and therefore can be interconnected.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top