Command for configuring wavelengths on BWS 1600G devices

3

On BWS 1600G devices, run the cfg-set-wavelenexp command.

Other related questions:
Command used to configure the wavelength of BWS 1600G
Run the :cfg-set-wavelenexp command to configure the wavelength of BWS 1600G.

Wavelength scanning results of MCA boards on BWS 1600G
Generally, the SNR AFEC is around 15. If center wavelength deviation is detected, an alarm is generated.

Conditions for the MCA board of the BWS 1600G to determine a wavelength loss and report the CHAN_LOS alarm
Question: What is the condition for the MCA board to report the CHAN_LOS alarm when wavelength monitoring configurations are correct? CHAN_LOS Answer: The MCA board determines a wavelength loss when it detects the following wavelength conditions: 1. The optical power is lower than -40 dBm. 2. The optical power is greater than 5 dBm. 3. A wavelength exceeds the standard wavelength by ±0.14 nm. 4. The signal-to-noise ratio is smaller than 7.5 dB. 5. If the difference between the maximum and minimum optical power is greater than 10 dB, the MCA board determines that the wavelength with the minimum optical power is lost.

Fan working mode of BWS 1600G
Question: What are the working modes of fans on BWS 1600G devices? Answer: Fans on BWS 1600G devices can work in two modes. One is the speed adjustment mode. In this mode, the fan speed can be manually set, including high speed, low speed, and stop. The other mode is the automatic adjustment mode. The system control board regularly checks the temperature of each board on the NE every minute to determine whether the temperature of each board exceeds the threshold. If the temperature of one board exceeds the upper threshold, the fan board enables the high speed mode. If the temperature of all boards exceeds the lower threshold, the fan board enables the low speed mode.

Whether the SSE7LWFT01 board of BWS 1600G supports wavelength tunable optical modules
The feature code T indicates that the wavelength is tunable. The SSE7LWFT01 board is a wavelength tunable board.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top