Method for communication between the NMS and OSN 1800 through OSN 6800

12

On the DCC Management page, the OSN 6800 port corresponding to OSN 1800 needs to be deleted before OSN 1800 can be managed on the NMS. The operation procedure is as follows: Select the OSN 6800 device, and click DCC Management in the Function Tree. In DCC rate configurations, delete the GCC12_18 channel on the OSN 6800 port corresponding to OSN 1800.

Other related questions:
Method used for communication between OSN 1800 and OSN 6800
Question: In a two-level aggregation ring, the optical path between OSN 6800 and OSN 1800 is available. How to use the DCC management function of OSN 6800 to manage OSN 1800 on the NMS? Answer: The channel corresponding to OSN 1800 needs to be deleted from the DCC management on OSN 6800 before OSN 1800 can be managed on the NMS. Detailed steps: Select the OSN 6800 device, choose Function Tree > DCC Management. In DCC rate configuration, delete the GCC12_18 channel corresponding to OSN 1800. The OSN 1800 can be managed on the NMS.

Whether an OSN 1800 can communicate with an SDH device through the extended ECC
An OSN 1800 can communicate with an SDH device through the extended ECC.

Methods for modifying the port working mode of OptiX OSN 6800 and OptiX OSN 1800
If the queried configuration service type is GE (GFP-T), the working mode does not need to be configured, and switches at both ends must be in the same working mode.

Connection between an OSN 1800 II subrack and OADM frames of OSN 1800
A straight-through network cable can be used to connect the OCTL ports of OSN 1800 and OSN 1800 II to supply power to OADM frames and manage them.

Connection between an OSN 1800 II subrack and an OADM frame of OSN 1800
A straight-through network cable can be used to connect the OCTL ports of OSN 1800 and OSN 1800 II to supply power to OADM frames and manage them.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top