Optical supervisory wavelength for the SCC board on OSN 1800

10

The 1310 nm wavelength can be used by the OSC port of an SCC board on OSN 1800.

Other related questions:
Optical supervisory wavelength used by an SCC board on OSN 1800
Generally, 1310 nm wavelength is used.

Whether an optical module whose wavelength is 1511 nm can be configured on the TM/RM port of the SCC board on an OSN 1800
The SCC board on an OSN 1800 needs to use an optical module whose wavelength is 1310 nm.

Whether an optical module whose wavelength is 1511 nm can be configured on the TM/RM port of the SCC board on OSN 1800
An optical module whose wavelength is 1511 nm can be configured for the TM/RM port of the SCC board on OSN 1800. However, OSN 1800 board supports CWDM. A conflict occurs between the 1511 nm supervisory wavelength and the 1511 nm service wavelength. Therefore, it is recommended that the SCC board on OSN 1800 use optical modules whose supervisory wavelength is 1310 nm.

Insertion loss of wavelength-adding channels of the MR8 board on OSN 1800
The insertion loss of wavelength-adding channels of the MR8 board on OSN 1800 is less than or equal to 4.0 dB.

Whether the FIU board on OSN 1800 supports optical power detection
The TNF2FIU board on OSN 1800 V1R5C00SPC200 supports optical power detection.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top