Clock input and output ports of BWS 1600G devices

5

2 x 75-ohm clock input interfaces receive local 2048 kbit/s or 2048 kHz clock signals.
4 x 75-ohm clock output interfaces transmit 2048 kbit/s or kHz clock signals to local devices.

Other related questions:
Clock input and output interfaces on BWS 1600G
2-channel 75-ohm clock input interfaces input 2048 kbit/s or 2048 kHz local clock signals. 4-channel 75-ohm clock output interfaces output 2048 kbit/s or 2048 kHz local clock signals.

Whether the BWS 1600G devices can transmit 2 MHz clock signals
Yes. The TC1 or TC2 (optical supervisory and timing transmission board) needs to be configured.

Weather BWS 1600G can transmit 2-MHz clock signals
The TC1 or TC2 OSC and timing transmission board need to be configured.

Fan working mode of BWS 1600G
Question: What are the working modes of fans on BWS 1600G devices? Answer: Fans on BWS 1600G devices can work in two modes. One is the speed adjustment mode. In this mode, the fan speed can be manually set, including high speed, low speed, and stop. The other mode is the automatic adjustment mode. The system control board regularly checks the temperature of each board on the NE every minute to determine whether the temperature of each board exceeds the threshold. If the temperature of one board exceeds the upper threshold, the fan board enables the high speed mode. If the temperature of all boards exceeds the lower threshold, the fan board enables the low speed mode.

Command for configuring wavelengths on BWS 1600G devices
On BWS 1600G devices, run the cfg-set-wavelenexp command.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top