Whether the ST2 board and the SC2 board can be interconnected on OptiX OSN 6800

2

It is not recommended that the ST2 and SC2 boards be interconnected because they have different rates and encoding formats (CIM used by the SC2 board and FEC used by the ST2 board). The SC1 and SC2 boards use the same rate and encoding format and therefore can be interconnected.

Other related questions:
Whether an ST2 board and SC2 board can be interconnected on an OSN 6800
It is not recommended that ST2 and SC2 boards be interconnected because they have different rates and encoding formats (CIM used by the SC2 board and FEC used by the ST2 board). SC1 and SC2 boards use the same rate and encoding format, and therefore can be interconnected.

Whether the TN13OBU103 board can substitute for the TN11OBU103 board on OptiX OSN 6800
The TN13OBU103 board can substitute for the TN11OBU103 board on OptiX OSN 6800. After the substitution, the TN13OBU103 board provides only the functions of the TN11OBU103 board, but the VOA is unavailable. Depending on the NE version and gain, the TN12OBU or TN13OBU board can substitute for the TN11OBU103 board so that the integration attenuation can be configured for the OBU.

Whether the TN54TOA board can be configured in the OptiX OSN 6800?
No, it cannot. The TOA board can be configured only in the OptiX OSN 8800.

Whether an ST2 board intended for an OSN 8800 subrack can be installed in an OSN 6800 subrack
An ST2 board intended for OSN 8800 can be used in an OSN 6800 subrack. To use the clock function of an ST2 board, the ST2 board must be inserted to the subrack equipped with clock boards.

Whether the ST2 boards intended for OSN 8800 devices can be installed in OSN 6800 subracks
The ST2 boards intended for OSN 8800 devices can be installed in OSN 6800 subracks. To use the clock function of the ST2 boards, the ST2 boards must be installed in subracks that are equipped with clock boards.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top