Can an AR router be logged in to over Telnet if Telnet is not enabled

15

The AR router cannot be loggeFor details about Telnet login moded in to over Telnet if Telnet is not enabled by running the telnet [ ipv6 ] server enable command.
configuration on the router.

Other related questions:
How to configure an AR router which cannot be logged in to over Telnet
If an AR router cannot be logged in to over Telnet, log in to the device over the Console interface for service configuration and configure Telnet. Alternatively, log in to the device by using the web NMS for service configuration and configure Telnet.

Do AR series routers support Telnet
All AR series routers support Telnet. On AR routers earlier than V200R005C30, Telnet is enabled by default. On AR routers of V200R005C30 and later, Telnet is disabled by default. Run the telnet [ ipv6 ] server enable command to enable Telnet.

How to disable Telnet in web mode on an AR router
The method of disabling Telnet in web mode is as follows: 1. Choose System Management > System Configuration > Service Management. 2. Select Disabled of Telnet Service to disable the Telnet service.

Telnet login and authentication mode configuration method on an AR router
In the user interface view, run the authentication-mode { password | aaa } command to configure a user authentication mode.

Enable the Telnet server function
The common cause of a login failure to the Telnet server is that the Telnet server function is disabled. By default, the Telnet server function is disabled on a switch. You can run the undo telnet [ ipv6 ] server disable command in the system view to enable the Telnet server function. system-view [~HUAWEI] undo telnet server disable [*HUAWEI] commit

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top