Whether the N402 board and the T302 board on OptiX OSN 9800 support IEEE 1588v2

13

The N402 board and the T302 board do not support IEEE 1588v2.

Other related questions:
Whether N402 and T302 boards on an OSN 9800 support IEEE 1588v2
N402 and T302 boards do not support IEEE 1588v2.

OSN 8800 boards that support IEEE 1588v2
If external phase source access is used, the following boards support IEEE 1588v2: 1PPS+TOD time access: TN16XCH, TN16UXCM, TN52STG, TNK2STG, TN16ATE, TN52STI Service time access: TOG, TN55TQX, TN53TDX, THA, TOA, TOX, THX If internal phase transmission is used, the following boards support IEEE 1588v2: OSC mode: TN11ST2 ESC mode: TOG, TN55TQX, TN53TDX, THA, TOA, TOX, THX, LEM24, LEX4, NPO2, TN54NQ2, TN54NS3, NPO2E, TN53NQ2, TN53ND2, TN53NS2, TN57NQ2, TN57ND2, TN52ND2

Whether the THA board support IEEE 1588v2
When the THA board carries GE services and the encapsulation mode is GFP-T which corresponds to GE(GFP-T) on the NMS, the following modes are supported for clock signal transmission: TC, TC+OC, BC, and OC. Note that the TX8/RX8 and TX16/RX16 optical ports do not support IEEE 1588v2.

OSN 8800 boards that support IEEE 1588v2 clock signals
All boards of the OSN 8800 support the following operations on IEEE 1588v2 clock signals: external phase source access and internal phase source transmission.

Method used to configure IEEE 1588v2 clocks for OptiX OSN 8800
For details about how to configure the IEEE 1588v2 clocks for OptiX OSN 8800, you can refer to the product documentation.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top