Method for checking whether fibers are correctly connected on OptiX OSN 6800

13

TTI bytes can be modified to check whether fibers are correctly connected on OptiX OSN 6800.

Other related questions:
Method used to check whether fibers are correctly connected on an OSN 6800
TTI bytes can be modified to check whether fibers are correctly connected on OSN 6800 devices.

Methods for querying and deleting logical fiber connections on an OptiX OSN 6800 board by using commands
Command for querying: :cfg-get-fibermgr:SrcNeid,SrcBid,DstNeid,DstBid. Command for deleting: :cfg-del-fibermgr:SrcNeid,SrcBid,SrcPort,DstNeid,DstBid,DstPort.

OptiX OSN 6800
The OptiX OSN 6800 intelligent optical transport platform (OptiX OSN 6800 for short) is a new-generation intelligent optical transport platform of Huawei. The OptiX OSN 6800 is a future-oriented product developed to address the trend towards IP-based long-haul backbone networks. It provides dynamic optical scheduling and flexible electrical scheduling. It features high integration and reliability, and supports multi-service transmission. OptiX OSN 6800 is applicable to longhaul backbone networks, regional backbone networks, local networks, the metro convergence layer, and the metro core layer.

Fiber connections of the OBU board on an OSN 6800
Fiber connections of the OBU board on an OSN 6800 are as follows: The TC port of the FIU board is connected to the VI port of the OBU board. The VO and IN ports of the OBU board are connected. The OUT port of the OBU board is connected to the IN port of the D40 board.

Methods for modifying the port working mode of OptiX OSN 6800 and OptiX OSN 1800
If the queried configuration service type is GE (GFP-T), the working mode does not need to be configured, and switches at both ends must be in the same working mode.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top