Incorrect password upon login to a newly delivered OSN 8800 using the CLI

7

The password of the root user has been changed to Changme_123.

Other related questions:
Password of the szhw user for newly delivered OSN 8800 T32 devices
The default password is Changeme_123.

Default password of the root user for a newly delivered OSN 8800
The default password of the root user has been changed to Changme_123.

Password of the szhw user for newly delivered OSN 8800 T32 devices
The password is Changeme_123.

Communication between a newly installed OptiX OSN 8800 subrack and existing subracks
If the newly installed subrack is configured as the slave subrack, connect the ETH port on the EFI board of the subrack to the ETH port on the EFI board of the existing subrack. If the newly installed subrack is configured as the master subrack, use extended ECC or SC2 for communication.

Does TE10 support the function of using the CLI to reset the web login password?
TE10 does not support the function of using the CLI to reset the web login password. You can only use the RST button to restore to the factory settings.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top