Command for setting alarm output of Metro 1000

5

The command for setting alarm output is as follows:
:cfg-set-swoutmode:Bid, SwitchId, Switchmode,
Example:
cfg-set-swoutused:14,1,enable\\Indicates that alarm output is enabled.

Other related questions:
Clock output interface of Metro 1000
V3 equipment: The clock interface is SYNC 1/2, which is a two-channel 120-ohm external clock input/output interface. V2 equipment: The clock interfaces are the IN I/OUT I and IN II/OUT II interfaces on the SCB board. The interface rate can be set to 2 Mbit/s or 2 MHz.

Indication of the red alarm indicator on the Metro 1000
If the alarm indicator on the Metro 1000 is steady red, a critical alarm is generated. You need to check it on the NMS.

How to shutdown alarm voice for metro 1000
Switch alarm button from “ALMON�?to “ALMCUT�?Enterprise Network

Commands for automatically backing up the database of Metro 1000 V3
The commands for automatically backing up the database of Metro 1000 V3 are dbms-get-autobackup and dbms-get-cyclebackup.

Whether fans for Metro 1000 V2 and Metro 1000 V3 are mutually universal
Yes, fans for Metro 1000 V2 and Metro 1000 V3 are mutually universal.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top