Clock output interface of Metro 1000

53

V3 equipment: The clock interface is SYNC 1/2, which is a two-channel 120-ohm external clock input/output interface.
V2 equipment: The clock interfaces are the IN I/OUT I and IN II/OUT II interfaces on the SCB board. The interface rate can be set to 2 Mbit/s or 2 MHz.

Other related questions:
Command for setting alarm output of Metro 1000
The command for setting alarm output is as follows: :cfg-set-swoutmode:Bid, SwitchId, Switchmode, Example: cfg-set-swoutused:14,1,enable\\Indicates that alarm output is enabled.

Whether fans for Metro 1000 V2 and Metro 1000 V3 are mutually universal
Yes, fans for Metro 1000 V2 and Metro 1000 V3 are mutually universal.

METRO 1000 SLOT capacity
Slot 1,slot 2,slot 3 provide 1.25G capcity respective ,slot 4 provide 622M

Default NE users of Metro 1000 V3
Question: What are the default NE users on the system control board for Metro 1000 V3? Answer: Metro 1000 V3 has eight default NE users, which are root, lct, snmpuser, sonnet, necems1, necems2, hn-metro, and LCD. Suggestion and conclusion: These default users cannot be deleted.

Clock input and output interfaces on BWS 1600G
2-channel 75-ohm clock input interfaces input 2048 kbit/s or 2048 kHz local clock signals. 4-channel 75-ohm clock output interfaces output 2048 kbit/s or 2048 kHz local clock signals.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top