On which interface is the default management IP address of an AR router configured

3

From specified versions on, the router is configured with a management IP address in factory setting and the web NMS is enabled.

Other related questions:
Configure the IP address of the management interface on AR routers
The procedure of changing the management IP addresses on the AR router is as follows: 1. You can configure a management IP address on the CLI using either of the following methods: a. Configure a management IP address on the management interface of the AR router. For example, the management interface is GE0/0/0. Set the management IP address to 192.168.1.10 and the mask length to 24. 2. On the VLANIF interface, configure the management IP address. Note: In the factory settings, all LAN interfaces on the AR150&AR160&AR200&AR120&-S&AR150-S&AR160-S&AR200-S are added to VLAN 1 by default. The default IP address 192.168.1.1/24 is configured for VLAN 1. Any LAN interface can use this IP address as the management IP address. The procedure for changing the IP address of VLAN 1 is as follows: For example, when LAN ports of the AR150 are added to VLAN 1, configure the management IP address as 192.168.1.10 and set the mask length to 24. system-view [Huawei] vlan 1 [Huawei-vlan1] quit [Huawei] interface vlanif 1 [Huawei-Vlanif1] ip address 192.168.1.10 24 [Huawei-Vlanif1] quit 2. Configure the management IP address through the web platform. Log in to the web platform, access WAN Access, and find the corresponding management interface in Ethernet Interface. Click the Modify under Operation on the right of the interface to configure an IP address for the corresponding interface.

Which AR routers have the Management silk screen on their management interfaces
Solution: The following series of AR routers have the Management silk screen on their management interfaces: AR100, AR100-S, AR110, AR120, AR120-S, AR160 (except for AR168F and AR169F/AR169BF), AR160-S, AR1200, AR1200-S, AR2200, AR2200-S, AR3200, AR3200-S, and AR3600.

Whether an E9000 blade is configured with a default BMC IP address
An E9000 blade is not configured with a default BMC IP address. To log in to the management WebUI of a blade, you need to configure the BMC IP address for the blade first. You can log in to the WebUI of the MM910 and configure the iBMC (iMana) IP address of a blade. For details, see Management Modules > MM910 Management Module User Guide > WebUI Overview (Software Version Is (U54)2.20 or Later) > Chassis Settings in the product documentation. http://support.huawei.com/ehedex/hdx.do?docid=DOC1000053358&lang=en&idPath=7919749%7C9856522%7C21782478%7C19955022%7C19961380&clientWidth=1729&browseTime=1456665583989

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top