Differences between the SL1 boards of the Metro 2050 and Metro 3000

7

The SL1 boards for the Metro 2050 are SS1*SL1/SS3*SL1/SS5*SL1, and the SL1 boards for the Metro 3000 are SS6*SL1.

Other related questions:
METRO equipment 3000 cross capacity
SS61EXCS cross board is cross OptiX 2500 + system clock board, veneer can achieve 96 x96 VC - 4 levels of high-order cross, 12 or 288 x 6048 x 6048 VC - 288 VC - 3 level low cross or equivalent of VC x96vc 96-4-4, VC - 3, VC - 12 reasonable mixed configuration.From 12 line/branch clock reference source and two external clock reference source option as a source of phase lock, possess the function of the sync processing status word, at the same time for the system to provide the 155.52 MHz and 77.76 MHz, 38.88 MHz and 2.048 MHz clock signals and 2 m frame, 8 k frame signal.SS61EXCS veneer in addition to the low order cross capacity is 6048 or 288 x 288 x 6048 VC to 12 VC - 3, other function and SS62XCS, SS63XCS, SS64XCS veneer is fully compatible with (SS62XCS/SS63XCS/SS64XCS low-order intersection capacity of 2016 or 96 x 96 x 2016 VC to 12 VC - 3)

Whether the EXCS boards for Metro 3000 can be replaced by XCS boards
You cannot replace only one EXCS board with one XCS board. Instead, you must use two XCS boards to replace both the active and standby EXCS boards.

How about DCC support for Metro 2050
SS11SCC:support 6 channel D1~D3;unsupport D4~D12�?SS12SCC:support 6 channel D1~D3;unsupport D4~D12�?SS13SCC:SS13SCC support handling 6 channel D1~D3 or D4~D12�?SS32SCC:SS32SCC support handling 10 channelD1~D3,unsupport D4~D12.

Command for changing the extended ID of the Metro 2050
The command for changing the extended ID of the Metro 2050 is :cm-set-subnet:extended ID.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top