Receive and transmit directions of RMON performance data of the EFT board on Metro 1000

33

The RMON performance data of the EFT board is received from the client side and sent by the peer board.

Other related questions:
If ethernet card of metro1000 support transparent transmit vlan
EFT card support transparent transmit vlan and EFS need to disable incoming port vlan detect .

Command for setting alarm output of Metro 1000
The command for setting alarm output is as follows: :cfg-set-swoutmode:Bid, SwitchId, Switchmode, Example: cfg-set-swoutused:14,1,enable\\Indicates that alarm output is enabled.

Whether fans for Metro 1000 V2 and Metro 1000 V3 are mutually universal
Yes, fans for Metro 1000 V2 and Metro 1000 V3 are mutually universal.

Function of the Ethernet port on the system control board of Metro 1000
The Ethernet port on the Metro 1000 is adaptive to RJ-45 connectors and is used for NMS access management. The port rate is 10 Mbit/s or 100 Mbit/s.

Thresholds for RMON performance events
RMON performance events of different boards have different thresholds. You are advised to use the default thresholds.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top