Whether fans for Metro 1000 V2 and Metro 1000 V3 are mutually universal

2

Yes, fans for Metro 1000 V2 and Metro 1000 V3 are mutually universal.

Other related questions:
Default NE users of Metro 1000 V3
Question: What are the default NE users on the system control board for Metro 1000 V3? Answer: Metro 1000 V3 has eight default NE users, which are root, lct, snmpuser, sonnet, necems1, necems2, hn-metro, and LCD. Suggestion and conclusion: These default users cannot be deleted.

Command for setting alarm output of Metro 1000
The command for setting alarm output is as follows: :cfg-set-swoutmode:Bid, SwitchId, Switchmode, Example: cfg-set-swoutused:14,1,enable\\Indicates that alarm output is enabled.

METRO 1000 SLOT capacity
Slot 1,slot 2,slot 3 provide 1.25G capcity respective ,slot 4 provide 622M

Clock output interface of Metro 1000
V3 equipment: The clock interface is SYNC 1/2, which is a two-channel 120-ohm external clock input/output interface. V2 equipment: The clock interfaces are the IN I/OUT I and IN II/OUT II interfaces on the SCB board. The interface rate can be set to 2 Mbit/s or 2 MHz.

Commands for automatically backing up the database of Metro 1000 V3
The commands for automatically backing up the database of Metro 1000 V3 are dbms-get-autobackup and dbms-get-cyclebackup.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top